1. <ruby id="in8cv"></ruby><strong id="in8cv"><pre id="in8cv"></pre></strong>
        1. <listing id="in8cv"><s id="in8cv"></s></listing>
          <dd id="in8cv"><object id="in8cv"></object></dd>
              您好,歡迎您來訪濟南天銳升降機械有限公司! 公司主營:液壓升降機、液壓登車橋、液壓升降平臺、液壓升降貨梯等。

              濟南天銳升降機械有限公司

              液壓升降平臺
              豐富的升降機設備生產經驗
              為您提供用心的升降機全套解決方案
              分類導航CLASSIFIED NAVIGATION
              聯系天銳機械 / Contact us
              聯系天銳機械

              濟南天銳升降機械有限公司

              客戶統一咨詢熱線

              188-5411-2626

              聯系電話:0531-84250097

              公司地址:山東省濟南市濟陽區濟陽街道工業園15-4號

              當前位置:  >  新聞中心

              濟南液壓升降機輪胎磨損的原因有哪些?

              文章來源:www.pzqsb.com   發布時間:2015-2-12 15:18:15   瀏覽次數:

              返回:新聞動態

              液壓升降機http://www.pzqsb.com/輪胎磨損大部分的原因都是使用不當導致的,平時使用的時候不注意,會導致輪胎的磨損部位及程度不同。
                 
              1、液壓升降機輪胎中央部分早期磨損的主要原因是充氣量過大,這樣不但影響輪胎的減振性能,還會使輪胎變形量過大,與地面的接觸面積減小,正常磨損只能由胎面中央部分承擔,形成早期磨損。如果在窄輪輞上選用寬輪胎,也會造成中央部分早期磨損。
              Hydraulic lifts the central part of the tire is inflated earlier mainly due to excessive wear and tear, it will not only affect the damping performance of the tire, the tire will deform excessive, reduce the contact area with the ground, the center of the tread only normal wear and tear part of the commitment, the formation of early wear. If you use wide tires on narrow rims, will result in the early part of the central wear.
                 
              2、液壓升降機輪胎兩邊磨損過大的主要原因是充氣量不足,或長期超負荷行駛。
              Hydraulic lifts on both sides of the tire wear is mainly due to an excessive amount less inflated, or long-term overload driving.
                
              3、液壓升降機輪胎的一邊磨損量過大的主要原因是前輪定位失準。當前輪的外傾角過大時,輪胎的外邊形成早期磨損,外傾角過小或沒有時,輪胎的內邊形成早期磨損,因此平時停放湖北升降平臺時要讓兩個前輪放直。
              While the main reason for excessive wear hydraulic lift tire wheel alignment is inaccurate. Current camber wheel is too large, the formation of early wear of the outer tire, the camber angle is too small or not, the inner edge of the tire is formed early wear, so usually let the two front wheels when parked straight Hubei lifting platform.
                 
              4、液壓升降機輪胎胎面出現鋸齒狀磨損的主要原因是前輪定位調整不當或前懸掛系統位置失常、球頭松曠等,使正常滾動的車輪發生滑動或行駛中車輪定位不斷變動。
              The main hydraulic lifts appear jagged tread wear is improper wheel alignment or suspension before adjusting positions disorders, Songkuang ball, so that normal scrolling wheel slip or the changing driving wheel alignment occurs.
               
              5、液壓升降機個別輪胎磨損量大,個別車輪的懸掛系統失常、支承件彎曲或個別車輪不平衡都會造成個別輪胎早期磨損。出現這種情況后,應檢查磨損嚴重車輪的定位情況、獨立懸掛彈簧和減震器的工作情況,同時應縮短車輪換位周期。
              Hydraulic lifts individual tire wear large, individual wheel suspension system disorders, bent or individual wheel bearing will cause unbalanced individual early tire wear. After this occurs, you should check the positioning of the situation badly worn wheel independent suspension springs and shock absorbers work, while the wheels transposition period should be shortened.
                 
              6、液壓升降機http://www.pzqsb.com/輪胎個別部位出現斑禿形磨損的原因是輪胎平衡性差。當不平衡的車輪高速轉動時,個別部位受力大,磨損加快,同時操縱性能變差。若在行駛中發現某一個特定速度方向有輕微抖動時,就應該對車輪進行平衡,以防出現斑禿形磨損。
              The reason the individual parts of a hydraulic lift tire appears areata shaped tire wear and poor balance. When unbalanced wheel rotation speed, the individual parts of a large force, accelerated wear and tear, while steering

              performance deteriorated. If it is found in traveling in a particular direction with a slight jitter rate, it should be balanced against the wheels to prevent the emergence of alopecia areata shape wear.

              欧洲女人牲交视频免费|日本不卡一区二区app|欲香欲色天天综合久久|亚洲日韩国产高清mp4,日本素人有码AV在线播放,2019最新资源站姿网,自拍 另类 图片区 亚洲 99re6热这里只有精品首页高清完整视频